×
ICOM
Wide Area Coverage with NXDN™ Type-C Trunking
Type-C Trunking Compatible
The IC-F5360D series provides NXDN™ Type-C trunking and NXDN™ conventional systems.
Frequency band:
VHF, UHF
Frequency range:
F5360D: 136–174MHz
F6360D: 400–470MHz
Power Output:
F5360D: 50W
F6360D: 45W
Number of Channels/Groups/Zones:
512 Channels / 128 Zones
Channel spacing:
Dimensions W x H x D
160×45×150mm; 6.3×1.77×5.91in
Weight
1.3kg; 2.87lb
Display
Operating temperature
–30°C to +60°C ; –22°F to +140°F
Mil spec
810-C, -D, -E, -F, -G.
IP Standards
Menu-Driven User Interface
The menu-driven user interface provides easy and intuitive operation. The functions can be toggled with the left and right [P2] and [P3] buttons and allow you to perform various operations and settings.
Built-in GPS Receiver*
Your current position data can be attached to a voice or data (status or emergency signal) transmission and can be sentto dispatch stations.
*External GPS antenna required.
Transparent Data
When IC-F5360D series is connected to a PC or other external equipment, the transparent data function allows data communication in a digital mode. It can be used for remote telemetry system control or data applications.
D-Sub Accessory Connector
The IC-F5360D series has a D-Sub 15-pin ACC connector for connecting various external devices.
Other Features
(* = Analog mode only)
Supplied Accessories
May vary depending on version.
 | ANTENNA 1 118-940MHz 1/4 wave antenna, unity gain, field tunable |
 | ANTENNA 2 144-174MHz 3dB gain mountable antenna, CHR, 59" high |
| ANTENNA 3 450-470MHz 5dB gain mountable antenna, CHR, 40" high |
| ANTENNA 4 152-162MHz, unity gain antenna, NMO compatible, 21.6". Factory tuned to 157MHz |
 | OPC1132 DC power cable (9.8ft) with 2-pin T connector. |
| OPC347 DC power cable (23ft) |
 | HM148G Self grounding microphone for mobile radios |
 | HM148T DMTF mobile microphone |
 | HM152 Standard microphone for low/mid range mobile radios |
 | HM152T DTMF modular microphone for LM mobile radios |
 | HM211 Noise cancelling mobile hand microphone |
 | SM26 Desktop microphone with monitor switch for mobile radios |
| F5061 MMB Mounting bracket for the F5061/F6061 radios |
| MOUNT 1 NMO Permanent Mount, 17ft RG58 cable, PL259 connector |
| MOUNT 2 Trunk Lid Mount/HD, BRKT, 45 DEG CBL, 58A/U PL259 |
| MOUNT 3 Black Magnetic Mount |
| Control Station Assemble Install mobile into power supply and cabinet to make control station |
| ICT CS120-20AG/IC09 110V power supply and cabinet for control station use for F5061/6061 |
| ICT IC09 220V 220V power supply and cabinet for control station use for F5061/6061 |
 | SP30 Large external speaker 20W |
 | SP35 External speaker 5W with 3.5mm speaker jack and 2m cable |
© Copyright Leavitt Communications | All Rights Reserved
