×
ICOM
Black Box Transceiver – Icom Quality. Small Footprint.
Icom’s M400BB is perfect for boats that need a radio but don’t have room on the helm. The M400BB consists of a two-piece black box configuration. Install the full RF black box unit in an out-of-sight place and connect the COMMANDMICIV™, HM-195 to the cockpit or flybridge. The HM-195 allows the operation of all radio functions, including DSC, radio, and hailer horn. HM-195 also utilizes the same user soft key interface for easy operation.
Operating temperature
–4˚F to +140˚F
IP Standards
IPX7
Dimensions W x H x D
8.5×3.11×4.92 in
Weight
1.83 lb
Frequency band:
TX: 156.025–161.600 MHz
RX: 156.050–163.275 MHz
CH70: 156.525 MHz
Usable channel groups:
INT, USA, CAN, WX channels
Power Output:
25 W
Space-Saving, Two-Piece Configuration
The IC-M400BB consists of a two-piece, black box configuration. All function control including DSC operation, can be made from the COMMANDMIC™, HM-195B/SW, and the RF unit, IC-M400BB, can be installed in an out-of-sight place.
New Intuitive User Interface
The new menu system is shared with Icom's latest models. The bottom line of the dot-matrix display shows the software key functions which can be toggled with the left and right buttons.
Active Noise Cancelling
The built-in bidirectional active noise cancelling reduces background noise to up to 90% and improves both your transmitted voice and incoming call. Hear and be heard more clearly.
10 W Loud Audio, Public Address and Foghorn
The IC-M400BB has a built-in 10 W amplifier that increases the audio output from an additional external speaker. The public address function allows you to make an announcement from the microphone like a loud speaker, and the foghorn can also be emitted from the external speaker.
Built-in Class D DSC
The built-in DSC watch function monitors Ch. 70 (DSC channel) activity, even while you are receiving another channel. DSC functions include: distress, individual, group, all ships, urgency, safety, position request/report, polling request and DSC test calls.
NMEA 0183®
When connected to an external GPS receiver, current position and time are shown on the COMMANDMIC display. When receiving DSC information from another vessel, the radio can transfer it to a navigational device via NMEA 0183 connectivity.
AIS Target Call with MA-510TR/MA-500TR
When connected to the optional MA-510TR/MA-500TR Class B AIS transponder, the AIS target call function allows you to set up an individual DSC call from the MA-500TR.
Other Features
No Accessories List at present
Please Contact Us for more information
Coming Soon...
© Copyright Leavitt Communications | All Rights Reserved
