Interoperability
Adopted Models:P25
The ability to communicate and coordinate among multiple public safety agencies and departments is essential for mission-critical operations. So the unsurpassed interoperability of the NX-5000 Series is especially advantageous: as well as supporting 3 digital protocols – P25 Phases 1 & 2 – in addition to FM analog, it also offers a rich feature set and future-ready/future-proof capabilities.
Multi-site Trunking
Adopted Models: NXDN P25
The NXDN Type-C trunking provides increased capacity, enhanced call capabilities, improved security and faster communications with less user interaction than conventional systems. The system automatically assigns channels for faster, efficient use of spectrum, allowing users to concentrate on the job at hand.
Two Multi-site Trunking schemes are available on the P25 protocol. P25 Phase 1 trunking (uses FDMA) is robust and reliable, while the feature-rich P25 Phase 2 that uses a 2-slot TDMA scheme requiring only 6.25 kHz of bandwidth realizes very high spectrum efficiency. Phase 2 is suitable if additional capacity is required.
Increased GPS Capacity / GPS Report Channel
Adopted Models:NXDN DMR P25
GPS is an ideal way to track the position of personnel and vehicles. And Gen2 further enhances this convenience to facilitate management. The System Controller is aware at all times how many GPS-equipped SUs are on duty, and when a new SU is registered, it is assigned a reporting frame and traffic channel (not the CCH, as before). Also, improvements to the air protocol minimize data overhead, thus maximizing traffic/data capacity while reducing GPS data processing time. Organizations that depend on GPS, such as utility companies, will be able to reap maximum benefit from these enhancements.
Phase 2 Ready
Adopted Models:P25
KENWOOD radios such as the NX-5000 Series is also compatible with P25 Phase 1 and Phase 2. While the original Phase 1 employs the FDMA access method for 12.5 kHz narrow-band communications, the newer Phase 2 uses a 2-slot TDMA scheme achieving 6.25 kHz equivalent bandwidth (the control channel is unchanged). Phase 2 is typically chosen if additional capacity is required.
IP Interface, Console Gateway
Adopted Models:NXDN
Up to 100 consoles can link to a single IP gateway (using KPG-1002GW gateway software), so a single network can connect a maximum of 1,000 consoles. Call recording and logging interfaces are available.
Yet another example of the flexibility of an NXDN Gen2 system is that it is SNMP-compatible throughout the network. An improved IP interface and system architecture facilitate access for vendors, offering an easy handshake even with third-party solutions. This makes customizing relatively simple, enabling for example two-way connectivity with public safety networks.
Extended Coverage
Adopted Models:NXDN
As RF signal strength weakens with distance, analog reception becomes increasingly noisy and intermittent. The low BER of NXDN improves reception in fringe areas, thereby effectively increasing range by as much as 20% over FM analog, resulting in a 50% increase in coverage area for digital 6.25 kHz.
Furthermore, even compared to digital 12.5 kHz bandwidth operation, the narrower 6.25 kHz bandwidth enabled by the FDMA technology of NXDN extends range by 15%. Receiver filters are narrower and can thus reduce noise. The net result is superior clarity over a 30% wider coverage area.
Digital Conventional Systems
Adopted Models:NXDN DMR
Digital conventional systems offer capabilities superior to those of analog conventional systems. With large unit ID and talk group ID capacity, operators can identify and segment different departmental/agency groups and sub-groups on shared channels. Also, Mixed Mode allows service to both analog and digital fleets at the same time.
Digital Conventional IP Network
Adopted Models:NXDN DMR
Making use of the inherent compatibility of digital communications with the Internet, it is easy to create a Wide Area Network by linking sites via the Internet to create a conventional IP network. Unlike analog (which requires D/A conversion), there is no degradation in sound quality. Additionally, with multiple remote sites linked to a dispatch center, it is possible to issue commands promptly and assuredly using a dispatch console.
Single-site Trunking
Adopted Models:NXDN DMR
NXDN Type-D Trunking is the FB6*-based digital LTR protocol specified by the NXDN Forum. Unlike Type-C trunking, there is no dedicated control channel: trunking is under the control of the home repeater assigned to each radio. And like LTR, there is no registration.
Also, Slot Select Trunking and Simplified Trunking will be available in future to enable more cost-effective DMR single-site trunking.
*FCC Station Class Codes
Multi-site Trunking
Adopted Models:NXDN P25
The NXDN Type-C trunking provides increased capacity, enhanced call capabilities, improved security and faster communications with less user interaction than conventional systems. The system automatically assigns channels for faster, efficient use of spectrum, allowing users to concentrate on the job at hand.
Two Multi-site Trunking schemes are available on the P25 protocol. P25 Phase 1 trunking (uses FDMA) is robust and reliable, while the feature-rich P25 Phase 2 that uses a 2-slot TDMA scheme requiring only 6.25 kHz of bandwidth realizes very high spectrum efficiency. Phase 2 is suitable if additional capacity is required.
Enhanced Multi-site Trunking
Adopted Models:NXDN
The network option leverages the power of IP to link multiple digital trunked sites (up to 1,000 with NXDN Gen2) for wide-area roaming and calling – across a campus, city, county or region. Scalable networks can be created over existing IT assets, private microwave, spread-spectrum links or carrier services using standard 10/100 Base-T Ethernet switches and routers. The 60,000 group ID and unit ID network capacity is sufficient for large organizations and multi-user system sharing.
Of course disasters such as tornadoes and forest fires can strike at any time, but Gen2 makes it possible to build a highly flexible system that can respond swiftly and dynamically to such challenges, and thus offer excellent reliability.
Subscriber units use advanced control channel hunting algorithms, RF signal strength and digital signal quality monitoring to automatically determine the best sites to make accurate and resource-sensitive roaming and registration decisions.
Multi-system Roaming – Highly Scalable IP Network
Adopted Models:NXDN
NEXEDGE Gen2 Multi-system Roaming Gateway Server has been developed to meet the needs of operators expanding to large-scale regional systems. Using the Multi-system Roaming, it is possible to connect to different trunked systems operated by other SMR/PAMR operators based on Gen2. Users will be able to enjoy seamless auto-roaming connection among individual networks with different system codes. By supporting the voice and data features of a local network across a large-scale system, NEXEDGE Gen2 serves the requirements of SMR and private operators for state-wide, multi-state or national systems.
Increased GPS Capacity / GPS Report Channel
Adopted Models:NXDN DMR P25
GPS is an ideal way to track the position of personnel and vehicles. And Gen2 further enhances this convenience to facilitate management. The System Controller is aware at all times how many GPS-equipped SUs are on duty, and when a new SU is registered, it is assigned a reporting frame and traffic channel (not the CCH, as before).
Also, improvements to the air protocol minimize data overhead, thus maximizing traffic/data capacity while reducing GPS data processing time. Organizations that depend on GPS, such as utility companies, will be able to reap maximum benefit from these enhancements.
© Copyright 2025 Leavitt Communications | All Rights Reserved